Jadever JWL-1.5K Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Аксесуари Jadever JWL-1.5K. Jadever JWL-1.5K 20 сторінок.
Також для Jadever JWL-1.5K: Посібник (20 сторінок)

Друкувати сторінку

7-2 Manual Tare & Preset Tare

When weighing a sample that must be held in a container, tare stores the container weight

into memory.

Manual Tare

1) Under the weighing mode, place the container on the weighing pan, wait till stable

symbol appears, and press the key

→

2) Place the item(s) to be weighed into the container. The weight displayed is the net weight.

3) Remove all items from the weighing pan; the screen displays the tare value.

4) To clear tare with an empty pan, Press down key

Preset Tare

1) Long press key

left-most digit blinking.

/MR or TARE/

2) Press

HOLD/LO/-

to change the value. Press

mode.

Put the load on the container, the scale will automatically deduct the value of the

container from the total value.

NOTE: Press Key

4) Clear the load on the container, and press

pre-tare.

7-3 Check Weighing

Lower limit setting

1. Begin by pressing down key

the right-most digit blinking.

2. To set the value of lower limit, press key

rightwards, key

decrease setting value. Key

TARE

for 3 seconds. The scale is now in Digital inputting mode with the

to move leftwards or rightwards. Press

G/N

to display gross and net weight by turns.

HOLD/LO/-

+/PRINT/HI

to increase setting values and key

M-/SET

(II)

. The container is tared.

TARE

or key

M+/SAVE

to save and return to weighing

TARE/

The scale is now in digital inputting mode with

/MR

to shift leftwards, key

to enable or disable the weighing checking

JWL

ZERO/ESC

+/PRINT/HI or

ZERO/ESC

to cancel the

TARE/

HOLD/LO/-

to shift