Gamber Johnson 7160-0909-12 Інструкція з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Комп'ютерні аксесуари Gamber Johnson 7160-0909-12. Gamber Johnson 7160-0909-12 5 сторінок. For panasonic cf33
Друкувати сторінкуDOCKING AND UNDOCKING THE COMPUTER
TO DOCK THE COMPUTER
1. Insert the front of the computer into the front blue guide pins of the dock. Arrows on the
dock point to the direction of installation. The round corner walls and plastic features will
guide the computer into place.
2. Rotate the rear of the computer onto the dock, squeeze on both corners, overcoming the
resistance until the Release Button returns to the "Latched" position. The grooves on the button
line up with the lower groove on the dock. There will also be an audible confirmation as the
latch system springs downward.
3. With the dock in the "Latched" position, turn the lock to the "LOCKED" position (Clockwise).
The Lock Fin will move upward and block the tablet release button on the computer.
TO UNDOCK THE COMPUTER
1. Turn the lock to the "UNLOCKED" position (Counter Clockwise). The Lock Fin will spring down.
2. Push up on the blue Release Button until the computer springs upward. There will be an
audible recognition as well. At this point, the computer is free to be removed.
3. Remove the computer by pulling it away from the dock.
Insert Front First
Squeeze
both corners
Dock "Latched"
4 / 5