Mainstreet Equipment 829GMC23B Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Мерчендайзер Mainstreet Equipment 829GMC23B. Mainstreet Equipment 829GMC23B 8 сторінок. Glass door merchandisers
Друкувати сторінкуOperation/Maintenance
NOTE: We strongly recommend that any servicing be performed by an authorized service technician.
WARNING: Disconnect power cord before cleaning any parts of the unit.
LOADING PRODUCT
•
Do not block the air duct/fan at the top of the unit. Maintain a minimum of 4" of clearance between products
and the fan at all times. Do not block return airflow in the front of the unit.
•
Ensure all shelves are sitting level and properly secured before loading products.
•
Do not store flammable and explosive gas or liquids inside the unit.
CLEANING THE FAN BLADES AND MOTOR
•
If necessary, clean the fan blades and motor with a soft cloth.
•
If it is necessary to wash the fan blades, cover the fan motor to prevent moisture damage.
CLEANING THE INTERIOR OF UNIT
•
When cleaning the cabinet interior, use a solvent of warm water and mild soap.
•
Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior finish.
•
Periodically remove the shelves and shelf brackets from the unit and clean them with mild soap and warm water.
•
A dusty condenser may lead to high energy consumption, less cooling effectiveness, and compressor damage.
CLEANING THE CONDENSER COIL
•
For efficient operation, keep the condenser surface free of dust, dirt, and lint.
•
We recommend cleaning the condenser coil at least once per month.
•
Clean the condenser with a commercial condenser coil cleaner, available from any kitchen equipment retailer.
•
Use a soft brush and/or a vacuum to remove any debris. Brush the coil in a vertical direction only.
CONDENSER COIL CLEANING INSTRUCTIONS:
The condenser coil is located at the bottom behind the panel.
1. Disconnect the electrical power from the unit.
2. Remove the front cover and base cover with a screwdriver.
3. Using a soft brush and/or vacuum, remove the dirt, lint, etc. from the finned condenser coil in a vertical direction.
4. Clean the condenser with a commercial condenser coil cleaner, available from any kitchen equipment retailer.
Ex. Noble Chemical Tech Line
5. After cleaning, straighten any bent condenser fins with a fin comb.
6. When finished, be sure to reinstall the front cover and base cover.
7. Reconnect the electrical power to the unit.
7
User Manual
Mainstreet Equipment