Deagan DC9160A Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Deagan DC9160A. Deagan DC9160A 7 сторінок. Chimes

1 Never use a metal type hammer or mallets to strike the sound column with. The sound column will

break.

2 Always use the instrument on a flat, level surface. The instrument will not function properly on a

sloped surface.

3 When assembling the stand, make sure each part is firmly attached, and there is no twisting or

disfigurement in the frame. Also, make sure that all wing nuts are firmly tightened.

4 Use your toes to operate the damper pedal. Do not stand on or put your weight on the pedal. Do-

ing so may cause the pedal to break.

5 Do not touch the damper adjuster (shown in the il-

lustration left). The adjuster has been adjusted at the

factory. Moving the adjuster may reault in the damper

not functioning properly.

6 When playing the chime, make sure the caster brakes

are firmly set and the chime stand does not move

about.

7 Hit the Head Plug when playing the chime. Never hit

the sound column (pipe) with the hammer.

8 Do not keep the chime in a place where high tempera-

tures and high humidity are present. Doing so will result

in the shortening of the instruments life.

9 For regular cleaning, wipe with a soft, dry cloth. Never

wipe with thinner, or polishing preparations.

1 When transporting or moving the instrument, do not subject it to strong shocks

2 The sound column's pitch and/or tone may change if the columns are scratched or bent. Be careful.

3 When the instrument is to be transported over long distances, especially by vehicle, do so with the sound

columns removed from the stand. The shape of the stand may change and the column's wire/strings may

be cut if the columns are not removed.

4 When attaching or removing the sound columns, do so in a place where there is sufficient room so

that the columns do not come into contact with other objects.

5 After the sound columns are removed, wrap them in a soft cloth, etc., to prevent scratching, and

then transport.

Before you use

Be careful when transporting

Damper Adjuster

Head Plug

Sound Column