Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T Посібник - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник для Іграшкова машинка на колесах Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T. Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T 18 сторінок. Pack 8
Також для Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T: Посібник (18 сторінок), Посібник (18 сторінок), Посібник (18 сторінок), Посібник (18 сторінок)
Друкувати сторінку
27.1
t
Ake
the piece composed of the firewall and side panels of the
engine housing. Put the windscreen wiper motor 27E inside the firewall
25A, as shown in the illustration. Secure the piece with two type CM
screws. Insert the voltage regulator 27F next to the windscreen wiper motor and press into
place.
27F
23B
22B
27.4
P
ut
the engine housing on top of the front section
of the chassis 5A. Make sure that the hoses 26H
and 26I, attached during the last assembly session,
are not in the way. Position the rear linchpins on the left panel 2 and right
panel 2 (22B and 23B) over the rear pegs on the front section of the
chassis 5A, while inserting the steering column
20E into the large hole in the firewall 25A.
Insert the front linchpins on the left and
right panels (22B and 23B) into the
holes in the front pegs on the chassis.
CM
27E
25A
AM
27A
AM
106
27.2
voltage regulator, easily recognisable in the illustration.
27.3
t
Insert the semi-circular pegs on the front left wheel
arch reinforcement plate 27A into the
AM
corresponding linchpins on the left panel 2 22B. Join the pieces with two
27B
type AM screws. On the other side of the engine housing, attach the
front right wheel arch reinforcement plate 27B to the right panel 2 23B.
As before, secure with two type AM screws.
20E
STAGE 27
c
onnect
the free end of the
positive cable 24H, which is attached
to the battery, to the linchpin on the
24H
urn
the engine housing section over.
22B
5A
27F
25A
23B