AGT INDUSTRIAL AGT-RC72 Посібник з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Фреза для щіток AGT INDUSTRIAL AGT-RC72. AGT INDUSTRIAL AGT-RC72 19 сторінок. Skid steer brush cutter
Друкувати сторінкуHandling safety
Maintenance Overview
The maintenance procedures described in this manual should only be carried out by
qualified mechanics who have been trained to repair this machine.
Some procedures require special tools and skills to complete. DO NOT attempt to repair
or perform service work on this machine unless you have the skills and tools to do so.
Contact your local dealer for maintenance and repair services.
NOTICE
Improper maintenance or modifications to the design or performance of this machine
will void the warranty. ONLY use genuine AGT equipment manufacturing replacement
parts on this machine.
Safety Instructions
Obey the following safety instructions when servicing or repairing this machine.
Wear proper Personal Protective Equipment (PPE) while working on this machine,
which may include safety glasses, hard hats, steel toe boots, gloves, etc.
Wear a welding helmet when welding to protect your eyes, face and neck from flash
burn, ultra-violet radiation and heat.
Ensure all jack stands, lifts and hoists are in good working condition and have the
rated load capacity to support the load.
If servicing is performed while the brush cutter is attached to the skid steer, turn
engine off, set parking brake and chock wheels to prevent skid steer from moving.
Only perform service work in a well-lit area.
Allow the machine to cool down before servicing this machine. Hot oils can burn
your skin.
NEVER work under an unsupported cutter deck.