Core ColourPoint Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Освітлювальне обладнання Core ColourPoint. Core ColourPoint 20 сторінок. Battery wireless up-light lithium
Друкувати сторінкуFunction Modes
There are three modes of Operation, accessed through the FUNCTION menu;
Cust
This mode allows the fixture to output a static Red, Green, Blue or White colour, or any
Col
combination thereof; each colour may be set to any value 0 to 255.
Any W-DMX signal, if present, is ignored.
In this mode the fixture outputs a static LEE or preset 'cc' colour as selected.
Static
The selection is remembered if the unit is switched off then back on or put into another
mode.
Any W-DMX signal, if present, is ignored.
DMX
In this mode the fixture is under control of Wireless DMX (W-DMX) so may be controlled
by a W-DMX compatible device or DMX compatible device with a W-DMX transmitter
attached.
The options available within DMX mode are described in more detail below.
To change Function press
to accept.
Then use the
keys to select the required function as above and press
The three modes of operation are discussed in more detail below.
All of these adjust the brightness settings for each colour.
Information for more technical users: the brightness is set using Pulse Width Modulation (PWM).
The PWM frequency is 610Hz.
Cust Col
When in Custom Colour mode the display indicates
the current selected colour.
Simply press
to step through the colours or accept
a colour value. Use
Value range 0 to 255.
Tip: Mix red & blue for purple/pink
Tip: Mix red & green for orange/yellow
Tip: Mix red & green with White for warm shades of white
ColourPoint User Manual V1_2
keys to select "CHANGE Function" and press
. Use the
keys to change the value.
.
FUNCTION
Cust Col
Set Col.
Red: 255
Set Col.
Grn: 000
Set Col.
Blu:128
Set Col.
Wht: 050
8