HIKOKI WR36DH Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Ударний дриль-шуруповерт HIKOKI WR36DH. HIKOKI WR36DH 20 сторінок.

Друкувати сторінку
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
WR18DH / WR36DH: Cordless Impact Wrench
To reduce the risk of injury, user must read
instruction manual.
Direct current
V
Rated voltage
n
0
No-load speed
/min
Oscillation per minute
Bpm
Impact rate
Ordinary bolt
H
High tension bolt
MT
Tightening torque (Maximum)
Square drive size
Weight
kg
Switching ON
0
Switching OFF
Disconnect the battery
Clockwise rotation
Counterclockwise rotation
High / Low mode selector switch
High / Low mode indicator lamp
Auto stop mode selector switch
Auto stop mode indicator lamp
Warning
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains
the accessories listed on page 17.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Tightening and loosening of all types of bolts and nuts,
used for securing structural items

SPECIFICATIONS

1. Power tool
The specifications of this machine are listed in the
Table on page 16.
<WR36DH>
Existing batteries (BSL3660/3620/3626, BSL18 and
BSL14 series) cannot be used with this tool. Use a multi
volt type battery.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
2. Battery
Model
BSL36A18X
BSL1850MA
*1 The tool itself will automatically switch over.
10
Voltage
Battery capacity
36 / 18 V *
1
2.5 / 5.0 Ah *
18 V
5.0 Ah
1