Maisi Smart Dashcam Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Відеореєстратори Maisi Smart Dashcam. Maisi Smart Dashcam 16 сторінок.
Друкувати сторінку
Power on delay: Off/10s/20s/30s. If it is set at 10s, the camera will power on
10 seconds after you connect it to the power charger.
Power off delay: Off/10s/20s/30s. If it is set at 10s, the camera will power off
10 seconds after you disconnect the power charger.
Record Audio
Under this setting, you can choose whether to record audio or not. If set it to
OFF, only video is recorded. If On, both audio and video are recorded. Press
or
to choose and press REC to confirm.
Date Stamp
If you set "Date Stamp" to On, then the date will appears on your footage
when you are doing playback. Otherwise it will not show up on the playback.
G-Sensor
Under G-Sensor mode, when an impact is detected, the footage will be saved
anyways. The G-Sensor prevents any recorded footage (during collision)
from being lost or overwritten. To access G-Sensor settings, select G-Sensor
from the Menu and use the
or
button to navigate settings: Off, 2G, 4G,
8G. The High settings (2G) will detect slight physical disturbance whereas
Low (8G) will detect only major physical disturbance. Press REC to confirm
and exit.
Date/Time
To set the time and date, use
and
to select and adjust the value and
press REC to confirm. After setting the time and date, you can adjust the
Date Format as well. Currently it supports YY/MM/DD, MM/DD/YY and
DD/MM/YY.
Plate Number on Movie
To configure the license plate display to your journey, use
and
to
choose the appropriate letter/number and REC button to confirm. Same way
you set the date and time.
Auto Power Off
You can set the camera to automatically turn off after 3-5-10 minutes or you
can simply turn off this function if you prefer.
Beep Sound
Page 6