HIKVISION AE-VC224T-IT Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження HIKVISION AE-VC224T-IT. HIKVISION AE-VC224T-IT 8 сторінок. Vehicle-mounted camera
Друкувати сторінку
Route camera's cables through the cable hole of
the bracket.
Secure the seal ring near the cable hole.
Adjust the camera main body with UP upward as
the figure below.
(Optional) If the installation site of the camera
needs to be sealed, please wipe silica gel on the screw
position and the cable hole, and seal them.
Align the cover with the crew holes on the bracket,
and insert 4 set crews (M2.5 x 7).
Connect the camera's cables to the corresponding
4-pin aviation plug.
Adjust the camera according to the figure below to
get an optimum angle, and fasten 4 set crews (M2.5 x
7).
Tear the protective film on the lens off.
Route the Cable
Adjust Camera
Insert Screws
Tilt：-8° to 8°
Tighten Screws and Adjust Camera
Fixing Hole
Seal Ring
4 M2.5 x 7 Srews
Tighten Screws
-8° to 16°
7
Pan