HIKVISION D0T PIR Series Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження HIKVISION D0T PIR Series. HIKVISION D0T PIR Series 17 сторінок. Turbo hd bullet camera
Також для HIKVISION D0T PIR Series: Посібник користувача (16 сторінок)
Друкувати сторінку
Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property
loss;
The precaution measure is divided into "Warnings" and
"autions";
Warnings: Serious injury or death may occur if any of the
warnings are neglected;
autions: Injury or equipment damage may occur if any
of the cautions are neglected;
Warnings Follow
these safeguards to
prevent serious injury
or death;
Warnings
In the use of the device, you must be in strict
compliance with the electrical safety regulations of the
nation and region;
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VD according to the IE60950-1 standard; Refer to
technical specifications for detailed information;
Do not connect multiple devices to one power adapter
to avoid over-heating or a fire hazard caused by
overload;
Make sure that the plug is firmly connected to the
power socket;
Make sure that the device is firmly fixed if wall
mounting or ceiling mounting is adopted;
If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cord, and
then contact the service center;
Never attempt to disassemble the camera by
unprofessional personal;
Do not drop the camera or subject it to physical shock;
Do not touch senor modules with fingers;
Do not place the camera in extremely hot, cold (the
operating temperature shall be -40° to 60°), dusty or
damp locations, and do not expose it to high
electromagnetic radiation;
If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently;
Do not aim the camera at the sun or extra bright places;
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam;
Do not expose the device to high electromagnetic
radiation or extremely hot, cold, dusty or damp
environment;
To avoid heat accumulation, good ventilation is
required for the operating environment;
Keep the camera away from liquid while in use for non-
water-proof device;
Available from A1 Security Cameras
w.a1securitycameras.com email: sales@a1securitycamera
autions
autions Follow these
precautions to prevent
potential injury or
material damage;