HIKVISION D7T Series Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження HIKVISION D7T Series. HIKVISION D7T Series 11 сторінок. Bullet & turret camera
Також для HIKVISION D7T Series: Посібник користувача (12 сторінок)
Друкувати сторінку
5. Connect the corresponding cables and install the
gang box cover with fixing screws.
Figure 2-6 Fix the Camera to the Ceiling/Wall
6. Refer to step 5 of 2.1.1 to adjust the camera to get
an optimum angle.
2.2 Installation of Type II Camera
Steps:
1. Attach the drill template (supplied) to the place
where you want to fix the camera, and then drill the
screw holes and the cable hole in the ceiling/wall
according to the drill template.
2. Loosen the screws to remove the clip plate and take
out the main body.
3. Fix the mounting base to the ceiling with screws.
4. Route the cables through the cable hole and
connect the corresponding cables.
5. Install the main body to the mounting plate and
insert the clip plate.
Figure 2-7 Drill Template
Figure 2-8 Remove the Clip Plate
Figure 2-9 Install the Turret Camera