Maiwe MISCOM7220G-4GF-16GT Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач Maiwe MISCOM7220G-4GF-16GT. Maiwe MISCOM7220G-4GF-16GT 6 сторінок. Industrial ethernet switch
Друкувати сторінку
[Power input]
Before connecting the power cord, make sure that the ground is connected.
Do connect the power cord to the power terminal of the device according to
the definition.
1. When using a switch, the voltage can only be input from V1+ and
V1-, V1+ connects to live wire L, and V1- to neutral wire N. Do not
connect from V2+, V2-; pay attention to safety and prevent electric
shock.
2. Power-on operation: First connect the power cord to the power
terminal of the device according to the definition shown in the figure
above, and then power on.
3. Power-off operation: first unplug the power plug, and then remove
the power cord.
Log in WEB Page
The device supports WEB management and configuration. The computer can
access the device through the Ethernet interface, and log in to the main
interface of the WEB server through the browser.
Configure the IP addresses of the computer and the device in the same
network segment and ensure that the computer and device can access
each other.
Enter the IP address of the device in the address bar of the computer
browser, the default IP address is 192.168.16.253.
Enter the user name and password of the device in the login page
Click the "OK" button to log in the WEB interface of the device.
Specifications
6
MISCOM7220G-4GF-16GT
Switch properties
Bandwidth
56G
Cache size
MAC table
Interface
1000M fiber port
1000M copper port
Full-duplex/half-duplex adaptive, supports MDI/MDI-X adaptive
Power supply
Consumption
DC power input
Supports dual power supply and reverse connection protection
AC power input
AC85~264V (frequency: 47~63Hz) or DC110~370V
Mechanical
156mm×85mm×137.7mm（L×W×H）(not include din-rail)
Size
Installation
Aluminum alloy single-rib chassis surface scattered
Heat
IP protection
MISCOM8220G-4GF16GT
128G
12Mbit
16K
4*1000Base-LX
SFP slot
16*10/100/1000Base-TX RJ45 ports
15W@24V(MAX)
DC24V(18~36V)/DC48V(36~72V)
35mm standard din-rail
IP40