Jaga JRT-100 Встановлення, налаштування та посібник користувача
Переглянути онлайн або завантажити pdf Встановлення, налаштування та посібник користувача для Терморегулятор Jaga JRT-100. Jaga JRT-100 4 сторінки.
Також для Jaga JRT-100: Встановлення, налаштування та посібник користувача (4 сторінок), Встановлення, налаштування та використання (16 сторінок), Встановлення, налаштування та використання (17 сторінок), Встановлення, налаштування та використання (4 сторінок)
Друкувати сторінку
Jaga Room Thermostat JRT-100 installation, setup & user manual
IMPORTANT: This manual will guide you through the installation, setup and use of the Jaga Room Thermostat JRT-100. Keep this manual in a
safe place for future reference.
Features
• for 2- and 4-pipe fan coil systems
• (4-pipe): heating and cooling mode
• (2-pipe): heating and cooling mode
• automatic or manual fan speed control
• semi-recessed mounting
• 2 programmable time zones
• 0-10V output
• for valves 24V AC/DC only
• optional external room temperature sensor (order code: 24800.00053032)
• it is possible (at manual control) to allow the fan to run once "set point" is
reached
Technical Data
Power Supply
Power Consumption
Set Point Range
Ambient
Relative Humidity
Back-light
Sensor
Accuracy
Protection Class
Housing
Product documentation:
• this manual is an integral part of the unit and must be handed over to the user
after the installation of the device is completed in order to comply with applicable
legal requirements.
• please read the manual carefully so that you understand the information in order
to ensure safety during installation, use and maintenance.
• no liability is accepted for damage resulting from non-compliance with the
guidelines in this installation manual.
Dimensions
8.6
8.6
M
CE-mark
The CE-mark symbolizes the compliance of the device with the following guide-
lines:
• EN 61000-6-3:2007+A1:2011
• EN 61000-3-2:2006+A1:2009+A2:2009
• EN 61000-3-3:2008
• EN 61000-6-1:2007
24V AC/DC
200 mA
+10 > +40°C
0 > +40°C
85% max
NTC 10K
+ 1°C (step control by +0.5°C)
IP30
ABS to UL94-5 fire retardant plastic
6
JRT-100
ATTENTION !!
1.5 m
The room thermostat must be installed at approx.
1.5 m above floor and out of reach of external influ-
ences such as direct sunlight, draught or other heat
sources as they may impede the correct functioning
of the thermostat. Nearby electric fires, televisions,
wall or table lamps may prevent the thermostat from
working properly.
Ensure that there will be enough space to allow easy
access to the two release locks, located at the bottom
of the wall plate.
1.4 3.4
Mount the JRT-100 Room thermostat on a suitable box
(60.3 mm fixing centers). Minimum depth of 45mm. The
internal size of the wall recess box must be at least
Ø60mm or 50x50mm.
Deze handleiding in het NEDERLANDS:
Ce manuel en FRANÇAIS:
Dieses Handbuch auf DEUTSCH:
This manual in ENGLISH:
www.jaga.be/downloads/Briza/Manual_JRT100.pdf
3.4
1.4
6