Gree XK41 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер Gree XK41. Gree XK41 19 сторінок. Command center for ductfree split systems
Також для Gree XK41: Технічний посібник з експлуатації (11 сторінок), Посібник користувача (2 сторінок)

Wired Controller XK41 & XK47

3 Operation Instructions

Press On/Off to turn on the unit and turn it off by another press.

Note: The state shown in Fig.3.1.1 indicates the "Off" state of the unit after power on. The state

shown in Fig.3.1.2 indicates the "On" state of the unit after power on.

Fig.3.1.1 "Off" State

Under ON state of the unit, press the Mode to switch the operation modes as the following

sequence:Auto–Cooling–Dry–Fan–Heating.

Press ▲or ▼ to increase/decrease the preset temperature. If pressing either of them

continuously, the temperature will be increased or decreased by 1°C every 0.5s,as shown in

Fig.3.3.1.

In the Cooling, Dry, Fan or Heating mode, the temperature setting range is 16°C~30°C.

In the Auto mode, the setting temperature is unadjustable.

Fig.3.3.1

Fig.3.1.2 "On" State

Fig.3.4.1