GameSir T4 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер відеоігор GameSir T4. GameSir T4 14 сторінок. Wireless controller
Також для GameSir T4: Посібник користувача (8 сторінок)

Друкувати сторінку

1. Device Layout

CONFIGURABLE M BUTTONS

B button

Y button

Default Key layout

a. Hold M1 then START or BACK, the backlight loop turns red and blue simultaneously to

be set up.

b. Hold the keys you want to combine.

c. Press M1 again, the red backlight loop turns off. Combination is successfully set.

d. These keys can be set up as combination buttons: A, B, X, Y, L1, L2, L3, R1, R2, R3. They

can be freely combined, either combination keys or single button.

e. M2, M3, M4 have the same settings as M1. This function can be set up only when the

controller is successfully connected.

TURBO FUNCTION

a. Press the key where you want to set turbo function, press TURBO key simultaneously,

then back light turns into red and Turbo function is successfully set.

b. Press the key that is successfully set for Turbo function, press TURBO key simultaneously,

then back light turns into red and Turbo function is successfully canceled.

* The following buttons can be used to set for Turbo function: A, B, X, Y, LB, RB, LT, RT.

A button

X button

AUTOMATIC POWER OFF

When GameSir T4 Wireless Controller is connected, it will automatically

power off within 180 seconds under no operation.

When GameSir T4 Wireless Controller is disconnected, it will automatically

power off within 30 seconds under no operation.

CHARGING

It takes 1.5 to 2 hours to full charge GameSir T4 Wireless Controller.

The charging indicator light keeps steady red during charging.

When fully charged, the charging indicator light goes off. Please unplug the Type-C charging

cable.

LIGHTING ADJUSTMENT AND MOTOR VIBRATION INTENSITY

ADJUSTMENT

Lighting adjustment:

Hold LT, RT, R3 simultaneously then press up or down of D-pad to adjust lighting. The lowest

level is light off among 5 levels of lighting.

ABXY backlight adjustment:

Hold LB+RB for 5 seconds to switch backlight on/off.

Motor vibration intensity adjustment:

Hold Turbo then press up or down of D-pad to adjust vibration. The lowest level is vibration

off among 5 levels of vibration.