GameSir T4 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер GameSir T4. GameSir T4 8 сторінок. Wireless controller
Також для GameSir T4: Посібник користувача (14 сторінок)

Друкувати сторінку

CONNECTION

Connect to PC via 2.4 GHz receiver (Xinput Mode)

a. Click Home button to turn on GameSir T4 Wireless Controller, LED

indicator lights scroll up and down, the controller can be connected.

b. Plug 2.4 GHz receiver into PC's USB port.

c. When 2.4 GHz receiver indicator lights up and LED1+LED4 of

GameSir T4 Wireless Controller stay on, Xinput Mode is connected

successfully.GameSir T4 Wireless Controller can be used normally.

* Hold Home button for 5 seconds, GameSir T4 Wireless Controller can

switch between Xinput Mode and Dinput Mode.

Xinput Mode: LED1+LED4 indicators stay on

Dinput Mode: LED1+LED3 indicators stay on.

Connect to PC via Type-C charging cable (Xinput Mode)

a. Connect GameSir T4 Wireless Controller to PC's USB port via Type-C

charging cable.

b. When LED1+LED4 of GameSir T4 Wireless Controller stay on, Xinput

Mode is connected successfully.

c. The corresponding driver will be automatically installed on PC. GameSir

T4 Wireless Controller can be used normally.

* Hold Home button for 5 seconds, GameSir T4 Wireless Controller can

switch between Xinput Mode and Dinput Mode.

Xinput Mode: LED1+LED4 indicators stay on

Dinput Mode: LED1+LED3 indicators stay on.

(Dinput Mode)

(Xinput Mode)

CONFIGURABLE M BUTTONS

B button

Y button

Default Key layout

a. Hold M1 then START or BACK, the backlight loop turns red and blue

simultaneously to be set up.

b. Hold the keys you want to combine.

c. Press M1 again, the red backlight loop turns off. Combination is

successfully set.

d. These keys can be set up as combination buttons:

A, B, X, Y, L1, L2, L3, R1, R2, R3.

They can be freely combined, either combination keys or single button.

e. M2, M3, M4 have the same settings as M1. This function can be set up

only when the controller is successfully connected.

TURBO FUNCTION

a. Press the key where you want to set turbo function, press TURBO key

simultaneously, then back light turns into red and Turbo function is

successfully set.

b. Press the key that is successfully set for Turbo function, press TURBO

key simultaneously, then back light turns into red and Turbo function is

successfully canceled.

* The following buttons can be used to set for Turbo function:

A, B, X, Y, LB, RB, LT, RT.

AUTOMATIC POWER OFF

When GameSir T4 Wireless Controller is connected, it will automatically

power off within 180 seconds under no operation.

When GameSir T4 Wireless Controller is disconnected, it will automatically

power off within 30 seconds under no operation.

A button

X button