Adexa HA-75 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Обігрівач Adexa HA-75. Adexa HA-75 5 сторінок.

Друкувати сторінку
WARNING AND CAUTIONS
1.
Put the plug into the power socket.
2.
The heater has two power ranges: 600W and 1200W.
3.
Turn control knob to left without oscillation function: LOW(600W) or HIGH(1200W).
4.
Turn control knob to right with oscillation function :
(oscillation+1200W).
HIGH
5.
Fig 6 is the angle knob with two angle modes: 120° and 360°. When using the
oscillation function, turn angle knob to left 120° and turn right 360°.
6.
Switch the heater off by turning control knob to OFF-position.
7.
Remove plug from the power socket.

CLEANING AND MAINTENANCE

●
Unplug the heater and let it cool down completely.
●
Keep the heater clean. The outer shell may be cleaned with soft, damp cloth.
You may use a mild detergent if necessary. After cleaning, dry the heater with a soft cloth.
●
Do not use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
●
Do not immerse the heater in water or allow it to get wet.
●
Wait till the heater is completely dry before use.
●
Any type of maintenance or repairs including the replacement of heating tube should
only be carried out by a qualified electrician or by a recommended service center.
●
For a long time of inactivity, please protect the heater with a fabric cover from rain and dust.
3
Fig 5
Fig 6
(oscillation+600W) or
LOW
LOW
: 600W
HIGH
: 1200W
: OSC+600W
LOW
:OSC+1200W
HIGH