Bristan CRZ SHXDIVCTFF BLK (D1) Інструкція з монтажу та посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Сантехнічний виріб Bristan CRZ SHXDIVCTFF BLK (D1). Bristan CRZ SHXDIVCTFF BLK (D1) 2 сторінки.

Друкувати сторінку
IMPORTANT
Isolate the
water supply
before
starting!
Turn cartridge spindle clockwise to
decrease the temperature. Turn
cartridge spindle anti-clockwise to
increase the temperature.
Servicing Intervals
Slide the
bracket onto
the riser rail,
then push the
riser extension
onto the riser
rail.
Press & hold
knob on the
bracket to
slide up or
down.
Hole size
5.5mm
Secure the riser
Drill holes. Secure the
bracket and
bracket to the wall.
riser rail.
Symptom
Cause
Remedy
No flow or
Partially closed isolation valve.
Open isolation valve.
low flow rate
Instantaneous water heater cycles on and off as
Increase water flow rate or pressure through system.
flow rate or pressure is too low.
Head of water is below the minimum
2 meters minimum required.
distance required.
Hot or cold water being drawn off elsewhere
Do not use other water outlets when using the shower.
causing pressure changes or instantaneous
boiler temperature changes.
Airlock or partial blockage in the supply pipe
Flush through pipe work to ensure removal of debris and any airlocks.
work.
Water
This is normal for a short time after using the
This is caused by residual water tension, the build up of water in the shower.
dripping
shower.
from shower
If water continues to drip, possibly due to the
Remove cartridge and clean, refer to 'Maintenance' section before starting any maintenance.
cartridge
Maximum
Maximum Water Temperature needs adjusting.
Refer to the Temperature Setting section to set your desired maximum temperature.
Water
Temperature
too Hot/Cold
Our Guarantee
At Bristan, we want to make things as easy as possible for our customers. That's why we offer
solid guarantees on all our products, effective from the date of purchase, to give you peace of mind.
To start your free guarantee simply scan the QR code and register your product.
Alternatively visit www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273
where our expert team of advisors will be able to offer you any help and advice.
For full guarantee terms and conditions visit www.bristan.com/service-centre/guarantees.
Bristan Group Ltd.
UK:
Bristan Group, B78 1SG.
EU:
Masco Europe S.à.r.l., 14 Rue Strachen
6933 Mensdorf, Luxembourg.
Tighten grub
screws at the
Using a spirit level
back.
to ensure the riser is
To adjust the
positioned correctly
height untighten
and perpendicular
and move the arm
to the wall, use the
to the desired
assembled riser to
height then
mark the desired
tighten again to
position of the bracket.
secure in place.
3mm
Attach the fixed head.
410mm twist the knob
Customer Service: +44330 026 6273
Web:
www.bristan.com
Email:
A Masco Company
To adjust height of
head between 50-
and slide the riser to
desired height.