Airflex5D AF5D-20 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Комп'ютерне обладнання Airflex5D AF5D-20. Airflex5D AF5D-20 17 сторінок. 2d/3d multi-projector stacking processor
Друкувати сторінку8.5.4 [Shift] adjustment (4 Corner adjustment)
8.5.5 Order
8.6 [Edge Mask]
Edge mask is a function to adjustment the display range of the image. It can mask each image edge up to 250
pixels with black background. The major purpose is to fit the image into the screen especially in the edge
blending application. In edge blending, if user applies geometry adjustment function, it will change the Grid
pattern size and aspect ratio in the whole image and affect the edge blending result. Edge mask is one
function to adjust the positions of the edges but still maintains the aspect ratio and location of the Grid pattern
without change. It will simplify the system installation.
The axis center can be adjusted horizontally and
vertically with the range of ±256 pixels in
horizontal position and ±200 pixels in vertical
position if the output resolution is under
1400x1050. In full HD output resolution, the
adjusting range is H±200 & V±150 pixels.
[Shift] function is to adjust the corners of the
image before or after Curved adjustment. It can
co-exist with other functions under [Warp] Menu.
The menu under [Shift] is the same as [4
Corner] adjustment to allow the adjustment of
the position in each edge independently in
curve image.
The response time in corner position
adjustment under [Shift] will be slower than [4
Corner] for flat screen display.
[Order] function is to decide the order for both
[Shift] and [Curve] adjustments.
For the correction of image distortion from
source side, user can select [Curved First].
For normal curved screen projection, [Shift
First] is defaulted and user can start with 4
corner adjustment.
10