Bristan IRBS4-CP Інструкція з монтажу та посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Сантехнічний виріб Bristan IRBS4-CP. Bristan IRBS4-CP 20 сторінок. Infrared temperature control automatic basin spout
Також для Bristan IRBS4-CP: Інструкція з монтажу та посібник користувача (16 сторінок)
Друкувати сторінку
Installation
1. Fit The Spout
Fit the spout to the sink / work surface
ensuring the sensor cable is threaded
through the hole in the sink / work
surface.
2. Secure Spout to Sink / Work Surface
Thread the rubber washer and metal
washer onto the fixing rod up to the
underside of the sink / work surface.
Secure the spout in place by screwing the
fixing nut onto the fixing rod.
Tighten the fixing nut using a suitable
spanner.
3. Connect Sensor Cable
See 'Electrical Connections' installation
on page 10.
4. Connect Water Supplies
Before connecting the water supply to
the spout flush through the pipework to
ensure removal of debris. Turn off the
mains water supply and close any
isolating valves. Screw the flexi tails into
the bottom of the spout, ensuring it is
tightened fully by hand only.
Connect the flexi tails to the hot and cold
water supplies. Turn on the mains water
supply letting the water flow for a few
minutes. Check all joints and connections
for any leaks.
8
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Sensor
Cable
Sensor
Cable
Flexi Hose