Bristan K 1/2 C Інструкція з монтажу та посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Сантехнічний виріб Bristan K 1/2 C. Bristan K 1/2 C 20 сторінок.
Також для Bristan K 1/2 C: Інструкція з монтажу та посібник користувача (5 сторінок)

Друкувати сторінку

Important Safety Information

• Please read these instructions thoroughly and retain for future use.

• All products manufactured and supplied by Bristan are safe provided they are installed

correctly, used correctly and receive regular maintenance in accordance with these

instructions.

• If you are in any doubt about your ability to install this product safely you must employ the

If you are in any doubt about your ability to install this product safely you must employ the

services of an experienced qualified plumber.

• Remove all packaging and check the components for damage before starting installation.

• This product must

must not be modified in any way as this will invalidate the guarantee.

must

• These fittings need to be installed in accordance with and meet the requirements of the Water

Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.

General Specifications

Operating pressure range (bar)

Basin Taps

Bath Taps

Basin Mixer

Bidet Mixer

Bath Shower Mixer

Bath Filler

Maximum static pressure – 10.0 bar

NOTE:- Nominally equal (balanced) inlet supply pressures are recommended for optimum

Performance of mixer taps.

Designed to comply with BS EN 200 for single taps / combination taps for water systems of type 1

and 2 general technical specifications and to be used within systems designed to BS 6700.

BS 6700 recommends the temperature of stored water should never exceed 65°C. A stored water

temperature of 60°C is considered sufficient to meet all nominal requirements and will minimise

the build up of lime scale in hard water areas.

Min

Max

0.2

7.0

0.2

7.0

0.2

7.0

0.2

7.0

0.2

7.0

0.2

7.0