decakila KUCF009B Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Кавоварка decakila KUCF009B. decakila KUCF009B 12 сторінок. Pump espresso coffee machine

Друкувати сторінку

BEFORE THE FIRST USE

To ensure the first cup of coffee tastes excellent, you should rinse

the coffee maker with warm water as follows:

1. Pour water into water tank, the water level should not exceed the

"MAX" mark in the tank. Then replace the water tank cover.

Note: the appliance is supplied with a detachable tank for easy

cleaning, you can fill the tank with water firstly, and then put

the tank into the appliance.

2. Set steel mesh into metal funnel (no coffee in steel mesh).

3. Place an jug on removable shelf. Make sure the steam control

knob is on the OFF position.

Note: the appliance is not equipped with jug, please use

yourself jug or coffee cup.

4. Connect to power source, Press the power switch "ON/OFF" one

time, the indicator is flashing.

5. After Pressing the coffee switch, this indicator is illuminated,

which means the fact that the pump pump water, and then there

is water flowing out. The pump is off when you press the coffee

switch again. If you press the steam switch selector, the appliance

begins to be pre-heated. At the same time, the steam light is

flashing. This process is over until the inner lamp of steam switch

is illuminated.

6. After water not dripping down any more, you can pour the water

in each container out then clean them thoroughly, now you can

start brewing.

Note: There may be noise when pumping the water for the first

time, it is normal, the appliance is releasing the air inside. After

about 20s, the noise will disappear.

PRE-HEATING

To make a cup of good hot Espresso coffee, we recommend

you preheating the appliance before making coffee, including

the funnel, filter and cup, so that the coffee flavour can not be

influenced by the cold parts.

1. Remove the detachable tank and open the tank cover to fill it with

desired water, the water level should not exceed the "MAX" mark

in the tank. Then place the tank into the appliance properly.

2. Select the steam mesh, Set steel mesh into metal funnel, make

sure the tube on the funnel aligns with groove in the appliance,

then insert the funnel into the appliance from the "Insert"

position, and you can fix them into coffee maker firmly through

turn it anticlockwise until it is at the "Lock" position.

3. Place an espresso cup on removable shelf.

4. Then connect the appliance to power supply. Make sure the steam

control knob is on the OFF position.

5. When you press the power switch "ON/OFF" once, the power

indicator is flashing, the other indicators are off. After finishing

preheating, the power indicator lights solidly. After pressing the