decakila KMHS004W Посібник із швидкого старту - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Машинка для стрижки волосся decakila KMHS004W. decakila KMHS004W 12 сторінок.

AFTER USE

When you have finished, switch off the clipper by setting

the On/Off switch to "1"position. Always clean the blades

after use.

Care and Cleaning

The hair clipper must be unplugged before cleaning.

1.Remove the comb attachment (if fitted).

2.Clean the blades and comb attachments with the

cleaning brush (supplied) to remove remaining loose hair

clippings.

3.Clean the housings of the clipper with a soft, dry cloth.

4.The cutting blades should be tightly oiled with your own

oil once every few haircuts as show.

5.The LCD display will remind you to add oil every 2 hours

of cutting. The "Oil blades"

will shine.

TO REMOVE THE CUTTING BLADES

Periodically it is advisable to remove the blade assembly for

more thorough cleaning.

1.Ensure that the On/Off switch is set to the "1'postion.

2.Using your thumb from the front of the clipper, Press back

against the cutting blades. The blade assembly will snap out

of the blade holding base.

3.Clean the blade assembly and inside the blade holding base

thoroughly with the cleaning brush (Supplied).

4.Re-assemble the blade assembly by engaging the bottom

latch, then pressing the top into the blade holding base.

Do not use any harsh detergents, abrasives, solvents or