Bristan PIV BSM C Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Сантехнічний виріб Bristan PIV BSM C. Bristan PIV BSM C 16 сторінок.
Друкувати сторінку
Maintenance
General Cleaning
Your product has a high quality finish
and should be treated with care to
preserve the visible surfaces. All
surfaces will wear if not cleaned
correctly, the only safe way to clean your
mixer is to wipe with a soft damp cloth.
Stains can be removed using washing
up liquid. All bath cleaning powders and
liquids will damage the surface of your
fitting, even the non-scratch cleaners.
Note: Never use abrasive detergents
or disinfectants or those containing
alcohol, hydrochloric acid or phosphoric
acid.
Cleaning the Valve
Before carrying out any maintenance,
turn off both water supplies or close any
isolating valves.
Prise out the handle cap, loosen the
grub screw using a 2.5mm hexagonal
key and remove the handle.
Remove the valve shroud (bath shower
mixer and bath filler only). Using a
suitable socket remove the valve.
Wash the valve with clean running water
and make sure that any debris has been
removed.
If necessary replace the valve using
parts supplied by Bristan.
Lightly grease the seal (only use silicone
grease), replace the valve,
shroud (if removed) and the handle.
Tighten the grub screw and push fit the
cap.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Cap
Grub Screw
Handle
Grub Screw
Plinth
Shroud
Valve
Wall
Surface
Cap
Handle
Shroud
Valve
Body
11