Centro G51207 Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу для гриль Centro G51207. Centro G51207 10 сторінок. Centro outdoor barbeque grill assembly manual
Друкувати сторінку
ASSEMBLY INSTRUCTIONS
12
DD
DC
A
Underside view
B
DC
C
DE
D
DG
E
a. Position the side burner (DD1) through the
opening in the left side burner drip pan (DC).
b. Make sure that the side burner (DD) engages
the side burner valve (CC) as shown in fi gure B.
c. Using the wing nut provided, assemble the
side burner to the side burner drip pan (DC), as
shown in fi gure C.
YOU WILL NEED:
13
X 1
d. Attach the end of the side burner electrode wire
(DE) to the underside of the side burner elec-
trode, as shown in fi gure D.
Ensure that the wire is pushed in fi rmly.
e. Place the side burner cooking grate (DG) into
postion on the side burner shelf, as shown in
fi gure E.
12
ASSEMBLY INSTRUCTIONS
13
CP
A
14
EF
B
Place the heat shield (CP) into the groove
which is located at the back side of the front
panel as shown in fi gure A. Next, attach the
heat shield (CP) to the upper back panel (CO)
by using the self tapping screws (x 4), as shown
in fi gure B.
THE HEAT SHIELD RESTS BELOW THE FRONT
BRACE AND BACK PANEL.
YOU WILL NEED:
9
X 4
c. Assemble the towel bar (CO) onto door (EF).
YOU WILL NEED:
1
4
5
6
7
8
BN
X 2
X 2
X 2
TIP: Before attempting to assemble the door (EF)
to the right pillar (ED), locate the two clasps
on the door Hinge. Next, locate the two
small openings on the right side pillar.
a. Hold the door perpendicular to the BBQ Cart.
Align the two clasps on the door hinge (EF),
with the two holes on the right side pillar (ED).
EF
Once aligned push the two clasps into the
openings, and immediately push down to lock
ED
clasps in place.
b. Assemble the door (EF) to the right pillar (ED),
as shown in fi gure B, using the screws pro-
vided.
YOU WILL NEED:
11
X 4
13