Bristan WASTES W SNK4 C Інструкція з монтажу та посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Сантехнічний виріб Bristan WASTES W SNK4 C. Bristan WASTES W SNK4 C 4 сторінки. Economy sink waste basket strainer waste & overflow
Друкувати сторінку
Introduction
Thank you for choosing Bristan, the UK's leading taps and showers expert. We have
designed this product with your enjoyment in mind. To ensure that it works to its
full potential, it needs to be fitted correctly. These fitting instructions have been
created to give you all of the information you need and, if you need any further
help, please do not hesitate to give us a call on 0330 026 6273.
Installation
1. Identify all components are present prior to
installation.
2. Fit the flange (3) to the sink, using a pure
silicon sealant where necessary.
3. Attach the rubber washer (4) and the waste
body (5) to the underneath of the sink, as
shown in the diagram. Secure them by fitting
and tightening screw (2).
4. Place the waste strainer (1) into the flange as
shown in the diagram.
5. Fit the overflow connector (8) to the waste
body (5) using washer (7).
6. Connect the overflow elbow (11) to the bath
using washer (12) and screw on overflow
face (13).
7. Connect the overflow tube to the waste body
(5)and overflow elbow (11).
8. Check all joints and connections for leaks.
5
6
1
13
12
2
3
10
4
9
8
7
11