AIRFLO PSV-8L Посібник з експлуатації та запасних частин - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з експлуатації та запасних частин для Розкидач AIRFLO PSV-8L. AIRFLO PSV-8L 17 сторінок.

OPERATORS MANUAL – PSV-8L (ELECTRIC)

Things to Know after Mounting the

Spreader

A. The tie-down straps are provided for

the purpose of securing the

spreader to the vehicle only and are

not to be used for any other

purpose. It is imperative that the

spreader be tied to the vehicle at all

times.

B. Be sure to verify with vehicles

manufacturer that the factory

installed anchor points are designed

for this application.

C. Periodically check to see if the

spreader mounting hardware is

securely tightened.

Mounting the Spinner/Chute

Assembly

1. Attach the Spinner/Chute Assembly

to the spreader inserting the lock

pins, shown in Figure 8, into the two

holes located at the end of the rails

of the spreader as shown in Figure 9.

2. Install the roller chain between the

sprocket mounted to the

Spinner/Chute Assembly and the

Motor Sprocket. Make sure both

sprockets are in-line with one

another. Tighten the gearbox

sprocket set screw. Install the roller

chain master link. See Figure 10.

AIR FLO MANUFACTURING., CO INC.

Figure 8.

Figure 9.

Figure 10.

5 |

P a g e