Centrometal BioSolid 17 Технічні інструкції - Сторінка 8
Переглянути онлайн або завантажити pdf Технічні інструкції для Котел Centrometal BioSolid 17. Centrometal BioSolid 17 17 сторінок. Steel hot water boilers
Друкувати сторінку
Connection to chimney, selection of a chimney
Figure 2. Possible ways of connections of boilers BioSolid to chimney
Thermal insulation
10mm
Opening for cleaning
min.
500 mm
max. 1000 mm
RECOMMENDATION
Figure 3. Chimney dimensioning for boilers BioSolid
60
30
25
50
22
45
40
20
35
30
25
18
20
15
10
5
6 7 8 9
10
15
Useful chimney height (m)
8
Thermal insulation
Opening for cleaning
An example of selection of a chimney:
- Boiler heat output: 34 kW
- Fuel: wood
- Required usable chimney height: H = 8 m
- Required chimney light diameter: 20 cm
- Usable chimney height - chimney height
from connection spot of smoke pipe to the
chimney top.
- Light chimney diameter - interior chimney
diameter.
Technical instructions BioSolid
FUEL REFILLING PHASE:
- After the regulation starts to display the lack of fuel
refilled (if it is necessary to continue the heating process)-BEFORE REFILLING,
press START button. (see Point 6.1.1).
- open the boiler door of combustion chamber (see point 8.0. and Figure 5.)
- align glow with poker
- insert fuel (recommended to fill the full firebox) (see Figure 6.)
- close the upper boiler door (see point 8.0. and Figure 5.)
TURNING OFF DIGITAL REGULATION:
- If we dont continues with heating proces, after the control indicator-no fuel
switches on
, wait until the boiler is cooled down below 65°C and until there
is no glow in the chamber. Only then the main switch on the boiler digital regulation
may be turned off (see 6.1.1.).
NOTE:
During the process of refilling the fuel the main switch of the boiler and the button
''START/STOP''have to be turned on.
Technical instructions BioSolid
Boiler use
, the fuel should be
25