Gamma 7000 Es Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Нанизувальні машини Gamma 7000 Es. Gamma 7000 Es 20 сторінок.

Друкувати сторінку

PROBLEM

String slips in clamps

String slips in string gripper

String clamp slips on base

String clamp Lock knob is difficult to turn

String tension too tight or too loose

Electrical system does not function

To check fuse, remove the power cord and pull the fuse holder straight out. Remove the

fuse from the clips and examine it. If it is burned out, replace it with the spare fuse and

replace the fuse holder in its socket. Supply power to the machine and check for proper

operation. If problems persist, contact Gamma Sports Customer Service at 1-800-333-

0337

With time and use, the clamping surfaces of your machine may become oily or dirty and result

in string or clamp slippage while stringing. Periodic cleaning of the following parts is

recommended.

String Clamps

Clean the inside gripping surfaces of the string clamp jaws by inserting a cloth or pipe cleaner

soaked with isopropyl alcohol between the jaws and rub back and forth. If the build-up is

excessive, dismantle the string clamp jaws to expose the gripping surfaces by removing the

adjustment screw. Using a small nylon brush, (such as a toothbrush), scrub the inside

surfaces until all debris is removed. Clean the jaws with isopropyl alcohol and re-assemble.

String Clamp Base

Clean the base of the clamps and the top of the turntable with isopropyl alcohol.

String Gripper

Clean inner gripping surfaces with isopropyl acohol soaked cloth or pipe cleaner.

TROUBLESHOOTING TIPS

CARE and CLEANING

SOLUTION

•

Adjust gap between jaws

Clean clamp jaws

•

Clean gripper jaws

Make sure string is wrapped over

•

upper gripper jaw before inserting

between gripper jaw plates

Clean base of clamp and top of

•

turntable

Check for proper position of thrust

•

bearing in the base of the winged lock

knob

Check tension using a tension

•

calibrator and adjust machine

calibration if necessary

Check power source

•

Check power cord connection

Check fuse

•

Call Gamma Sports customer service

•