Gamma PROGRESSION 602 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Нанизувальні машини Gamma PROGRESSION 602. Gamma PROGRESSION 602 12 сторінок.
Також для Gamma PROGRESSION 602: Посібник користувача (16 сторінок)

Друкувати сторінку

Gamma PROGRESSION 602 Посібник користувача

STRINGING THE FRAME

Clamping the String

Clamp the tensioned string to the next adjacent string

using the second string clamp. Release the string from

the gripper by raising the tension arm.

Repeat the procedure for all of the remaining main

strings and tie off following the racquet manufacturers

recommendations.

Starting the Cross Strings

Follow the manufacturer's recommended stringing pat-

tern for one or two piece stringing. This will determine the

starting point for the cross strings. If applicable, tie the

first cross string using an appropriate starting knot.

Weave the cross strings over and under the main strings

being careful to alternate the weave of each consecutive

cross string so as to be opposite of the previously

installed cross string.

Once the final cross string is tensioned and clamped, tie

off at the appropriate hole specified by the racquet

manufacturer.