Gamma X-ST Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Нанизувальні машини Gamma X-ST. Gamma X-ST 19 сторінок.
Також для Gamma X-ST: Посібник користувача (19 сторінок), Посібник користувача (19 сторінок)
Друкувати сторінку
MOUNTING THE FRAME
Adjusting the Frame Support Posts
Loosen the lock bolts of the frame support
posts and space them apart with the frame
support slides separated by the approximate
length of the racquet head. Although it is not
required, it is good practice to center the sup-
port posts on the turntable. Lock one of the
posts in position by tightening the lock bolt and
position the other post until the frame support
slide is positioned near the inside surface of
the racquet frame. Securely tighten the lock
bolt of the second support post.
Caution: To avoid racquet damage, the center
posts should not contact the racquet prior to
locking down the support posts.
Tightening the Frame Supports
Tighten the Frame Support Slides by turn-
ing the adjustment knob clockwise until
snug against the racquet frame and slight
resistance is felt.
Caution: Overtightening the Center Supports
will stretch the head of the racquet and could
cause racquet damage.
Frame Shoulder Support Adjustment
Being sure the shoulder supports are free
to swivel in their mountings, simultaneously
rotate the shoulder support adjustment knobs
clockwise until both shoulder supports gently
and squarely contact the frame.
7