Gamma Oculus 40 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Освітлювальне обладнання Gamma Oculus 40. Gamma Oculus 40 12 сторінок. 12x40w rgbw led wash with pixel mapping
Друкувати сторінку
2. Setup and Operation
Using the LCD Menu and Buttons
The Oculus features Up/Down/Menu/Enter Buttons to navigate the menu. Use "ENTER" to
go into the menu, UP/DOWN to make selections, and MENU to go back to a previous
menu.
DMX Setup
DMX Basics
DMX512 stands for digital multiplex 512. This means that 512 channels are controlled
digitally through 1 data cable.
A channel is a set of 255 steps that are assigned to control attributes in each light. This
may be a color like red, green or blue, and intensity, strobe, pan/tilt or other attributes.
Multiple sets of 512 "universes" may be used. Only 1 universe will travel on a DMX cable,
but through networked DMX (Art-Net or sACN E1.31), many universes can travel over a
network.
DMX Wiring
DMX works by connecting 1 or multiple lights to the output of a DMX lighting console or
software with a DMX interface.
DMX lights connect in what is called a "daisy-chain". Your first DMX cable will plug it's
male DMX connector into the female DMX connector on your lighting console. The
remaining female connector will then connect to the DMX input on your first light.
You may then connect your next fixture to the output of your first light, and continue the
chain.
Oculus 40 – GAMMA LED Vision
Page 6 of 12