Green Brook DH021A Інструкція - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція для Аксесуари Green Brook DH021A. Green Brook DH021A 2 сторінки.

1. If necessary, remove the base cover of the bell push to reveal the terminal

screws.

2. Loosen one of the terminal screws and wrap one of the stripped ends of bell

wire around the exposed screw thread, ensuring the screw is tightened

securely afterwards. Repeat this process for the other screw terminal and

wire.

3. Fix the base to the doorframe using two of the screws and fixings provided.

Try to position the door push in an unexposed place to protect it from bad

weather.

4. Snap the cover back on if appropriate.

An alternative bell push can be used with this doorchime, please follow the

instructions on the pack.

For use with an illuminated bell push.

Only an 8Volt 1Amp transformer is recommended, (GreenBrook Model DAT01A).

Please carefully follow the manufacturer's instructions - use terminals C and D on

the doorchime case to connect up the transformer. Remove the batteries from

the doorchime and ensure the power is switched off at the mains before

attempting any wiring.

If the doorchime does not work, check the batteries and also that the bell wire is

connected to the correct terminals. Do not use terminal marked B.

If the doorchime does not work. check the batteries and also that the bell wire is

connected to the correct terminals. Do not use terminal marked B.

NOTE:

Product & Packaging Disposal

When disposing of this item and its packaging please follow local regulations and use an

appropriate waste disposal centre.

See GreenBrook website for further details.

WIRING YOUR BELL PUSH

USING A TRANSFORMER

TROUBLE SHOOTING

GUARANTEE

Your GreenBrook Wired Doorchime is

guaranteed for 1 year from the

date of purchase.

This is in addition to your statutory rights.

PLEASE KEEP THESE INSTRUCTIONS

SAFE FOR FUTURE REFERENCE

WEST ROAD . HARLOW

ESSEX . CM20 2BG . UK