IKEA 304.118.54 Посібник - Сторінка 28
Переглянути онлайн або завантажити pdf Посібник для Духовка. IKEA 304.118.54. IKEA 304.118.54 36 сторінок.
Друкувати сторінку
ENGLISH
Problem
The display shows an error
code that is not in this table.
There is no good cooking
performance using the func‐
tion: Direct Steam.
There is no good cooking
performance using the func‐
tion: Direct Steam.
The water in the cavity em‐
bossment does not boil.
The water comes out of the
cavity embossment.
The lamp is turned off.
The door is locked.
Service data
If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
There is an electrical fault.
You did not turn on the func‐
tion: Direct Steam.
You did not fill the cavity em‐
bossment with water.
The temperature is too low.
There is too much water in
the cavity embossment.
The Eco Fan Cooking function
is turned on.
There was a power cut.
We recommend that you write the data here:
• Deactivate the oven with
• If the display shows the
Refer to "Activating the func‐
tion: Direct Steam".
Refer to "Activating the func‐
tion: Direct Steam".
Set the temperature at least
to 110 °C.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with a
cloth or sponge. Add the cor‐
rect amount of water to the
cavity embossment. Refer to
the specific procedure.
Normal behaviour of the Eco
Fan Cooking function. Refer
to "Daily Use" chapter, Heat‐
ing Functions.
Check the power supply.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not
remove the rating plate from the oven cavity.
.........................................
.........................................
.........................................
Remedy
the house fuse or the
safety switch in the fuse
box and activate it again.
error code again, contact
an Authorised Service
Centre.
28