Major tech MT 770 Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Major tech MT 770. Major tech MT 770 20 сторінок. Clamp meter
Також для Major tech MT 770: Інструкція з експлуатації (16 сторінок)
Друкувати сторінку
1.
SAFETY INFORMATION
This manual contains information that must be
followed for operating the meter safely and
maintaining the meter in a safe operating
condition. If the meter is not used in a manner
specified in this manual, the protection provided
by the meter may be impaired
The Model MT770 has been designed and
complies with IEC 61010-1 and EN 61010-1
Safety Requirements for Electronic Measuring
Apparatus.
Read through the operating instructions
!
throughly and understand the instructions
before operating the meter.
Keep the manual at hand so as to enable
!
quick reference when necessary
Ensure that the use of the meter is in its
!
intended applications and follow
measurement procedures described in this
manual.
Follow all safety and operating instructions to
!
ensure maximum personal safety during the
use and operation of the meter.
Failure to follow the above instructions may
!
cause injury, instrument damage and/or
damage to equipment under test.
The symbol indicated on the meter means that
!
the user must refer to related parts in the
manual for safe operation of the meter. Be
sure to carefully read the instructions following
each symbol in this manual.
!
DANGER is reserved for conditions and
actions that are likely to cause serious or fatal
injury
!
WARNING is reserved for conditions and
actions that are likely to cause serious or fatal
injury
!
CAUTION is reserved for conditions and
actions that are likely to cause minor injury or
2
!
WARNING