Major tech MT730 Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Major tech MT730. Major tech MT730 16 сторінок. Ac trms clamp meter
Друкувати сторінку
INCORRECT
3.2. AC Voltage Measurement
1.lnsert the black test lead into the negative COM terminal and the red
test lead into the positive V terminal.
2. Set the function switch to the VAC position.
3. Connect the test leads in parallel to the circuit under test.
6. Read the voltage measurement on the LCD display.
3.3. DC Voltage Measurement
1. lnsert the black test lead into the negative COM terminal and the red
test lead into the positive V terminal.
2. Set the function switch to the VDC position.
3. Connect the test leads in parallel to the circuit under test.
4. Read the voltage measurement on the LCD display.
3.4. Resistance
1. lnsert the black test lead into the negative COM terminal and the red
test lead into the V positive terminal.
2. Set the function switch to the Ω .CAP position.
3. Touch the test probe tips across the circuit or component under test.
4. Read the resistance on the LCD display.
CORRECT
7