Centurion D5-EVO REPAIR Посібник з програмування

Переглянути онлайн або завантажити pdf Посібник з програмування для Відкривач воріт Centurion D5-EVO REPAIR. Centurion D5-EVO REPAIR 4 сторінки. Sliding gate operator
Також для Centurion D5-EVO REPAIR: Інструкція з монтажу Посібник з монтажу (14 сторінок), Посібник з конфігурації (13 сторінок)

PROCEDURE FOR BACKING UP OR RESTORING USER DATA ON D-SERIES

CONTROLLERS.

Remove the encoder/origin 6-way plug from the controller and plug the memory

module into the 4-way connector.

Press and hold the oblong button

A screen will appear displaying the text "Setting Limits"; press the up arrow button

twice. The screen will display "General settings".

Press and release the oblong button

Using

the Memory Module or select Restore EEPROM using the up/down arrow buttons if

you wish to download all user data from the memory module to the controller .

Once you have made the selection press and release the oblong button

(a) For the backup procedure, the screen displays: "Back up date with Time

(b) For the Restore EEPROM procedure, the screen will display: "Back up date

www.centsys.com

Select Backup EEPROM if you wish to transfer all controller user data to

No".

• Using

buttons, select Yes and then press the oblong button

once.

• The display will indicate backing up EEPROM; wait until it displays

backup successful.

• The screen will revert to displaying "backup EEPROM".

• Press and release the round/exit button

The Memory Module can now be removed from the DOSS plug.

with Time No"

• Using

button select Yes and then press the oblong button .once

• The display will indicate Restoring EEPROM; wait until it shows

Restoring successful.

• The screen will revert back to "Restore EEPROM".

• Press and release the round/exit button

The Memory Module can now be removed from DOSS plug.

D5-EVO REPAIR

for approximately 2 seconds.

(don't hold it).

TECHNICAL SUPPORT | 0860 0860 236 887

once

twice to exit the menu.