Major tech MT957 Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Major tech MT957. Major tech MT957 17 сторінок. Lcr meter

SAFETY INFORMATION

The following safety information must be observed to insure maximum

personal safety during the operation of this meter:

Do not use the meter if the meter or test leads look damaged, or if

you suspect that the meter is not operating properly.

Never ground yourself when taking electrical measurements. Do not

touch exposed metal pipes, outlets, fixtures, etc., which might be at

ground potential. Keep your body isolated from ground by using dry

clothing, rubber shoes, rubber mats, or any approved insulating

material.

Turn off power to the circuit under test before cutting, unsoldering,

or breaking the circuit. Small amounts of current can be dangerous.

Use caution when working above 60V DC or 30V AC RMS, such

voltages pose a shock hazard.

When using the probes, keep your fingers behind the finger guards

on the probes

Measuring voltage which exceeds the limits of the multimeter may

damage the meter and expose the operator to a shock hazard.

Always recognize the meter voltage limits as stated on the front of

the meter.

Never apply voltage or current to the meter that exceeds the

specified maximum:

Function

Resistance, Capacitance, Diode test,

Continuity

Inductance

Input Limits

Maximum Input

600V DC/AC