Major tech MTC50 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мультиметр Major tech MTC50. Major tech MTC50 14 сторінок. 2-in-1 lan tester & multimeter
Друкувати сторінкуSafety
International Safety Symbols
Safety Precautions
1.
Improper use of this meter can cause damage, shock, injury or
death. Read and understand this users manual before
operating the meter.
2.
Make sure any covers or battery doors are properly closed and
secured.
3.
Always disconnect the test leads from any voltage source
before replacing the battery or fuses.
4.
Do not exceed the maximum rated input limits.
V DC or V AC
µA AC/DC
Resistance, Diode & Continuity Test
5.
Use great care when making measurements if the voltages are
greater than 25VAC rms or 35VDC. These voltages are
considered a shock hazard.
6.
Always discharge capacitors and remove power from the
device under test before performing Diode, Resistance or
Continuity tests.
7.
Remove the battery from the meter if the meter is to be stored
for long periods.
This symbol, adjacent to another symbol or terminal,
indicates the user must refer to the manual for further
information.
This symbol, adjacent to a terminal, indicates that,
under normal use, hazardous voltages may be
present.
Double insulation
Input Limits
Function
Maximum Input
600V DC/AC
200mA/250V fast acting
Fuse
600V DC/AC
4