Centurion POLOphone Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу для Домофонна система Centurion POLOphone. Centurion POLOphone 17 сторінок. Entry panel
Також для Centurion POLOphone: Посібник з монтажу (16 сторінок), Посібник з монтажу (17 сторінок), Процедура введення в експлуатацію (4 сторінок)
Друкувати сторінку
Operation
When setting up the system the handsets can be split into two groups. Intercommunication can only
occur between these groups.
When the call button(s) at an entry panel is pressed it will ring the handset(s) linked to the specific
handset group.
The entry panel call buttons can be configured as:
· One-Button entry panel:
Top button (A) and bottom button (B) rings all handsets in the system
· Two-Button entry panel:
Top button (A) rings group "A" handsets
Bottom button (B) rings group "B" handsets
The factory default is a two-button entry panel.
NB: In a system with two entry panels, a V2 entry panel will only work with a V3 entry panel that
has been configured for two-button operation, not one-button operation. V3 entry panels are
compatible in either one- or two- button mode.
In an installation with two entry panels the call tone will be different for each entry panel. There will be
a simultaneous ring at the entry panel to confirm the ringing at the handset(s).
When lifting the handset, voice communication can take place between the entry panel and the
handset. If any of the other handsets in the system are picked up while this communication is taking
place, there will be common communication with these handsets.
A dedicated call button is provided on the handset to call the other group of handsets. Any handset in
one group will ring all the handsets in the other group. The ring tone is different to that generated when
being called from the entry panels so that the user can identify that it is an internal call. If communica-
tion is taking place between handsets the entry panels are automatically disconnected to ensure
privacy of internal communication.
HANDSET
Triggers the relay
on Entry Panel 1
A
U
X
Closes the auxiliary
contacts on the
terminal block
on the underside
of the Handset
Rings the other
Handset group
A
U
X
Triggers the
relay on
Entry Panel 2
POL phone
System overview & operation
ENTRY PANEL
A
B
POLOphone Intercom - Page 3
Button "A"
rings group "A"
handset(s) in a
two-button
configuration
or all handsets
in a one-button
configuration
Button "B"
rings group "B"
handset(s) in a
two-button
configuration
or all handsets
in a 1-button
configuration