Major tech MT245 Інструкція з експлуатації - Сторінка 17

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Випробувальне обладнання Major tech MT245. Major tech MT245 20 сторінок. Car battery tester

Друкувати сторінку

Battery Status corresponding with Battery Voltage (After Ignition)

Battery Voltage

12.8V-13.2V

13.2-14.8V

>14.8V

3.3. Playback

Ÿ Clamp the red and black clips on the positive and negative electrodes

of the battery correctly.

Ÿ Use the up and down buttons to select on the playback icon and press

enter.

Ÿ Use the "up" and "down" buttons to select the data saved during the

previous test and the waveform diagram for starting the test, and then

press "enter" to view.

Ÿ Press the exit key to return to the previous menu.

3.4. Printing Data

Before using the print data function, the tool must be connected to the

computer via

USB

When the cable is ready, insert the CD into the computer

1. first install the USB driver.

1. then open the printing software

2. select the COM port number.

If there are some data histories in

the printing software, clear them.

3. Use the "up" and "down" buttons,

select "upload test results" in the

options, and press "ENTER" to

confirm.

Battery Status

Too Low

Normal

High Voltage

Effects and Measures

Battery may not be charged; Check

alternator or other electrical load

Normal

May damage the battery Check

alternator stabilizer