IKEA IBD350DS02 Інструкція користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція користувача для Духовка. IKEA IBD350DS02. IKEA IBD350DS02 32 сторінки. Built-in electric single and double oven
Друкувати сторінку
Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press.
■
Oven is preheated (long tone).
■
Kitchen timer (long tone with reminder tone every 60 seconds).
■
Function has been entered.
■
Three Tone
Invalid keypad press.
■
Four Tone
End of cycle (with reminder tone every 60 seconds).
■
Use the Settings keypad to change the tone settings.
Settings
Many features of the oven control can be adjusted to meet
your personal needs. These changes are made using the
Settings keypad.
Use the Settings keypad to scroll through the features that
can be changed. Each press of the Settings keypad will
advance the display to the next setting. After selecting the
feature to be changed, the control will prompt you for the
required input. Details of all of the feature changes are
explained in the following sections.
Press CANCEL to exit Settings.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
1. Press SETTINGS until "TEMP UNIT" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones, except reminder tones. Reminder tones remain enabled
when audible tones are disabled.
1. Press SETTINGS until "SOUND" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press SETTINGS until "SOUND VOLUME" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
OVEN USE
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS until "END TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS until "KEYPRESS TONE"
is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute
after the end of cycle tones.
1. Press SETTINGS until "REMINDER TONE"
is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
12/24 Hour Clock
1. Press SETTINGS until "12/24 HOUR" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven
12 hours after the oven initiates a cook or clean function.
This will not interfere with any timed or delay cook functions.
1. Press SETTINGS until "12 HR AUTO OFF"
is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Languages - Scrolling Display Text
Language options are English and French.
1. Press SETTINGS until "LANGUAGE" is displayed.
2. The current setting will be displayed.
3. Press the number keypad as instructed by the
scrolling text to select the new language.
4. Press CANCEL to exit and display the time of day.
5