Centurion SMART GUARD air Інструкція з експлуатації Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Шлюз Centurion SMART GUARD air. Centurion SMART GUARD air 12 сторінок. High security keyless access control
Також для Centurion SMART GUARD air: Інструкція з експлуатації Посібник з експлуатації (11 сторінок)
Друкувати сторінку
5. General description
The CENTURION SMARTGUARDair is a durable, quality keypad designed
to
provide
The weatherproof unit is wireless, and is powered by two AA Alkaline
(penlight) batteries. When any key is pressed, a backlight illuminates the
keypad for ease of use at night.
Access is granted by the keying in of a valid access code. The access code
can vary from one to ten digits. Up to one thousand different access codes
can be stored within the unit's non-volatile memory. New codes can be
added and existing codes can be deleted as required. 'Token codes' can be
added, allowing only a preset number of activations, after which the code
becomes invalid.
Each code can activate one of fifteen channels. A channel is defined as
an external CENTURION code-hopping compatible receiver, either
stand-alone, single channel, multichannel or integrated into products
such as the D5-Evo, D10, VECTOR2, etc.
An anti-hack feature can be enabled, causing the unit to shut down
after a pre-selected number of incorrect codes have been entered. The
unit will then reset after a pre-selected time. A telltale LED will indicate
that the anti-hack feature has been triggered. Once programmed, the
system can be backed up onto the optional Backup Memory Module
(Code PCA12201V1.0). This allows the system to be easily restored if
required. An optional independent tamper switch can be fitted and
wired internally to transmit an alarm signal if the unit has been forced
open, or removed from its mountings.
6. Technical specifications
Supply voltage
Operating temperature
Operating humidity
Output
Housing material
Degree of protection
Battery life
Code length
Memory capacity
Memory retention
Token codes
1. Non-condensing
7. Changing the Master Code
The following procedure will enable the user to change the default
Master Code
Master Code. The Master Code may also be learned into the system by
following the procedure in Section 8 'Adding a New User'.
The Master Code must always be stored at address
The Master Code can be used as a normal access code
Enter the following keystrokes:
1. Enter Program Mode
2. Select KwikLearn
3. Enter address
4. Enter new code
1
Default Master Code=
Example: Replace the default Master Code
Master Code =
Enter the following keystrokes:
1. Enter Program Mode
2. Select KwikLearn
3. Enter address
4. Enter access code
8. Adding a new user
The following procedure will add a new access code at a specified
address, assign which channel the code must activate and how many
accesses are allowed before the code becomes invalid.
Enter the following keystrokes:
1. Enter Program Mode
2. Select Add Menu
3. Enter user address
4. Enter access code
5. Select channel
6. Enter access limit
7. Exit Add Menu
8. Exit Program Mode
high
security
1 2
3 4
or the currently stored Master Code to a new
Code
3 7
8 1
Address
Code
[Accesses]
access
control
2 x AA Alkaline batteries or 12V DC
-18°C to +55°C
0 - 90%
Up to 15 individual channels
Polycarbonate
IP55
Two to five years
One to ten digits
1000 unique non-volatile codes
>200 years
1 - 254 activations
Master Code
0
0
1 2
3 4
1
2
3
0
0
3
7
8
1
Master Code
1
Channel
to
restricted
1
2
2. Subject to usage
Indicator LEDs
1
1 2
3 4
Indicator LEDs
4
Indicator LEDs
areas.
0
with a new