Green Digital Power-tech G10-XXL Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій Green Digital Power-tech G10-XXL. Green Digital Power-tech G10-XXL 2 сторінки. 3.2v-14.8v 1s-4s, li-ion/polymer/lifepo4 battery charger

Друкувати сторінку

Brief Introduction

G10-XXL is a main member of digital-chargers from Green Digital

Power-tech Co., Ltd. It represents today's new technology for 3.2V(1s)

~14.8V(4s) Li-Ion, Polymer or Li-Fe battery pack charging. G10-XXL

programmed 2 auto stages (Im-Um) charging process，It is designed for

2~8Ah Li-Ion/Polymer/LiFePo4 battery pack. When the battery is connected

properly, "Im" will give bulk constant current charging, until voltage reach CV

point. Then, "Um" stage is followed, the output voltage is limited on 4.2V/per

cell(3.6v for LiFePo4) , until the charge current declined to 0.1A. At this stage,

the battery is charged completely and the charger will cut off output automatic.

Further, G10 can display the charging process, indicate the battery

capacity from 50% to 100% timely. This is helpful for user.

For more safety, G10 will inter protection mode when the battery polarity

reversed our the output connectors shorted.

Specification for G10-XXL

Input Voltage

100-240VAC，50-60Hz

Input Current

0.2A

Back current drain

<1.3mA

Charge voltage limit

G10-04L[F]

4.2V+-1%

[F] 3.6V+-1%

Bulk charge current

1.5A +-8%

Operate Temperature

-20℃~50℃

Natural convection. Do not cover the charger.

Cooling

Charge principle

Auto 2 stages: Im-Um

3.7V, 7.4V, 11.1V, 14.8V Li-ion/Polymer

Battery type

For "-F" suffix: 3.2V, 6.4V, 9.6V, 12.8V LiFePo4

Battery capacity

2-8Ah

Size

81X43X30mm

Enclosure

Dust protected, Water splashing resistance)

IP54 (

Weight

100g

G10-08L[F]

G10-12L[F]

G10-16L[F]

8.4V+-1%

12.6V+-1%

16.8V+-1%

[F] 7.2V+-1%

[F] 10.8V+-1%

[F] 14.4V+-1%

1.1A +-8%

0.8A +-8%

0.7A+-8%

Display Panel

Power on

(When

input OK)

How to use:

Connect the AC cord to the socket, The "power" lamp will light on RED.

Connect positive charger clip (red) to positive battery terminal, the black clip

to negative. (You can use other dc plugs to connect battery), the

"50%~100%" lamps will light on flowing. If the battery polarity reversed or

output shorted, 3 lamps will flashing, please check the setup.

Depend on the charged capacity, 50%~100% lamps will lights up solid

sequence, until the battery is fully charged. Then you can power off the

charger and disconnect the battery or you can charge a new battery if you

need.

The table shows the duration of 80% state charged for an empty battery.

Battery Cap.(Ah)

G10-04L

G10-08L

hours

1.8

1.5

3.6

7.2

Charging process indicator:

Indicate battery capacity from 50% to

75%, then to 100% when charging.

All 3 lamps flashing means battery

polarity reversed or output shorted.

All lamps are "off" means no battery.

G10-12L

G10-16L

hours

2.5

4.5

5.5

6.5

8.5

hours