ENGLISH
4. Press
again and again to change:
Duration and microwave power. Turn
the control knob to set the value and
press
to confirm.You can also press
to change Duration in 30 seconds
steps.
When the time set for Duration ends, the
signal sounds and the oven stops.
5. Turn the knob for the heating functions
to the off position.
When you open the oven door,
the oven stops. To start it again,
close the door and press
Setting the function: Microwave Combi
1. Remove microwave bottom glass plate.
2. Turn the knob for the heating functions
to select the function
Caution! Do not let the oven
operate when there is no food in
it.
The display shows a default temperature.
3. Press
to start.
4. Press
again and again to change:
Duration, microwave power or
Clock functions
Clock functions table
Clock function
To show or change the
time of day. You can
TIME OF DAY
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
DURATION
heating function is set.
.
.
Application
temperature. Turn the control knob to
set the value and press
Around 5 degrees before the set
temperature is reached the signal
sounds. When the set time for Duration
ends the signal sounds again and the
oven stops.
When you use the Microwave function
with the function Duration for more than
7 minutes and in Combi mode, the
Microwave power cannot be more than
600 W.
5. Turn the knob for the heating functions
to the off position.
While using Microwave
Combi function the oven can
make various noises. They
are normal for this function.
Heat-up indicator
When the oven function operates, the bars
in the display
appear one by one when
the temperature in the oven increases, and
disappear when it decreases.
Clock function
To set when the oven
turns off. Use only when a
END
heating function is set.
Combination of DURA-
TION and END function.
TIME DELAY
14
to confirm.
Application
Друкувати сторінку