Jam P303-H Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Навушники Jam P303-H. Jam P303-H 6 сторінок.

SET UP

CHARGING YOUR EARPHONES

The "Live Large" earphones are powered by a

rechargeable battery. Please make sure to charge

earphones before use.

A – Unwrap the integrated charging cable and plug

the micro USB end into the charging port on the

earphones.

B – Connect the larger USB plug to your computer

or a powered USB AC adapter. An AC adapter is not

included in the box, but you can use the one for your

cell phone or pick one up next time you're at the

store.

C – When the LED flashes red, it indicates that the

battery is low and it's time to plug in and recharge.

Charge for about 2 hours to get up to 7 hours of play

time; while charging, the light will stay solid red.

Once fully charged, the LED will turn off.

USE

A – TURN ON YOUR EARPHONES

Long press the "play/pause" button for 3 seconds to

turn on your earphones.

B – CONNECTING TO A DEVICE

Once turned on, the earphones will immediately search

for a device to pair to; the LED will blink red and blue

alternately. Enable Bluetooth on your device. From the

Bluetooth menu, select "Live Large." When the device

and Live Large are connected, you will hear a tone and

the LED light will turn solid blue.

You may also connect your device to Live Large using

an aux cord, which is not included. When plugged in,

the light will turn solid red.

Once paired, your device and earphones will find each

other every time, as long as your device's Bluetooth is

on. If you're connecting to a computer, you may have

a few more steps on that end. You'll have to get that

information from the computer company.

Depending on your device, you may be prompted to

enter a pairing code. If so, use "0000" as the code.

Holding down the "X" and "O" buttons at the same

time, for 5 seconds, will disconnect a paired device.