Jam HX-EP310 Посібник користувача та інформація про гарантію
Переглянути онлайн або завантажити pdf Посібник користувача та інформація про гарантію для Бездротові навушники Jam HX-EP310. Jam HX-EP310 2 сторінки.
Також для Jam HX-EP310: Посібник користувача та інформація про гарантію (14 сторінок)
Друкувати сторінку
Hey. Have we seen you here before?
Register your ear buds at www.jamaudio.com
Information like where you bought it and
how you're using it is like gold for the
people who make these speakers.
Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos en
www.jamaudio.com
Thanks for the invite. We've got some pretty cool friends too, you
know? Check them out at www.jamaudio.com
Package Contents
User Manual
Just Charge It
Charging the ear buds is so easy you've
probably gured it out by now, but just
in case, you've got two options:
your computer or a wall outlet.
1. The cord that came with the ear buds
—the one with the USB on one end and
the Micro USB on the other—will work
with your computer.
2. If you want to use the wall outlet, you'll
need to pick up a power cord with a
Micro USB the next time you're at the
store, or use any USB AC adapter,
including the one for your cell.
Now go get ready for an epic night while your ear buds do too.
They need about 3 hours of me time for 6 hours of party time.
Control Your Destiny...or at Least Your Ear Buds
1. That's the power switch.
2. Push it to play, push it again to pause.
3. Turn the music up or down. (Wait, why
do you need to turn it down?)
4. That light lets you know when
Bluetooth has the hook-up.
5. The power cord goes here.
6. Check out how much juice is in the
battery.
Allow Us to Shed Some Light
What It Looks Like
Flashing RED
CHARGE
RED (when plugged in)
GREEN (when charging)
Quick Flash BLUE/RED
Slow Flash BLUE
Bluetooth
Connection: It's a Setup
®
Like any amazing couple, this one starts with a connection—one between your
device and the ear bud's Bluetooth.
Here's how it works:
1. We know you're probably going to think, "derp" with this one, but we have to
say it: Make sure the smartphone, tablet or computer you want to hook up to
the ear buds has Bluetooth. (There. We got that out of the way.)
2. Turn on the ear buds and look for the little blinking light.
3. Do whatever your device needs you to do on its end. (We don't know what
you're using. We're not spies.)
4. Look for TRANSIT BUDS in your device's Bluetooth list or click
YES—whatever pops up on your device—and BAM! you're connected.
5. Now hit PLAY on your ear buds and crank it up—or down if you're lame.
You're probably only going to have to do this once, unless your device goes
through a major I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth will nd each other every time just as long as the earbuds are set to
Bluetooth and your device's Bluetooth is, you know—on.
If you're connecting to a computer, you may have some extra steps on that end.
You'll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code. If
prompted enter "0000" as the code.
To clear the pairing history hold the POWER button for 5 seconds.
Note: If you turn on your Transit Ear Buds but haven't started the party, they
will automatically power off after 2 minutes of inactivity.
USER GUIDE AND WARRANTY INFORMATION
Charging Cord
Ear Buds
What it Means
Low Battery
Charging
Ready to Party
Pairing Mode
Connected
HX-EP310
3
1
4
5
2
6
3