IKEA 404.947.78 Посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для Холодильник IKEA 404.947.78. IKEA 404.947.78 41 сторінка.

IKEA 404.947.78 Посібник
ENGLISH
loaded, the compressor may run
continuously, causing frost or ice formation
on the evaporator. In this case, set the
temperature control toward higher
temperature to allow automatic defrosting
and to save energy this way. To save energy,
do not open the door frequently or leave it
open longer than necessary.
Freezer: The internal configuration of the
appliance is the one that ensures the most
efficient use of energy. Do not remove the
freezer blocks from the freezer basket. The

Care and cleaning

Cleaning the interior
Before using the appliance for the first time,
the interior and all internal accessories
should be washed with lukewarm water and
some neutral soap to remove the typical
smell of a brand-new product, then dried
thoroughly.
Caution! Do not use detergents,
abrasive powders, chlorine or oil-
based cleaners as they will
damage the finish.
Caution! The accessories and
parts of the appliance are not
suitable for washing in a
dishwasher.
Periodic cleaning
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe
them clean to ensure they are clean and
free from debris.
3. Rinse and dry thoroughly.
Defrosting of the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
during normal use. The defrost water drains
out through a trough into a special container
To download the full version visit www.ikea.com
colder the temperature setting, the higher
the energy consumption.
Refrigerator: Most efficient use of energy is
ensured in the configuration with the
drawers in the bottom part of the appliance
and shelves evenly distributed. Position of
the door bins does not affect energy
consumption. Do not set too high
temperature to save energy unless it is
required by the characteristics of the food.
at the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the
defrost water drain hole situated under the
salad drawers to prevent the water
overflowing and dripping onto the food
inside.
For this purpose use the tube cleaner
provided with the appliance.
Cleaning the air channels
1. Remove the plinth (A), then the
ventilation grid (B).
8