GaN EZ Drive GS65011-EVBEZ Технічний посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Технічний посібник для Материнська плата GaN EZ Drive GS65011-EVBEZ. GaN EZ Drive GS65011-EVBEZ 18 сторінок. E-hemt open loop boost evaluation board
Друкувати сторінку
_____________________________________________________________________________________________________________________
Quick Start Guide
This chapter will guide the user through the evaluation board overview, hardware
operation, test setup and test results.
Evaluation Board Overview
The evaluation board contains:
• Connectors for both high voltage (0Vdc < V
power supplies
• Connector for the output load
• User-friendly probe connector and vias for V
verification
• The jumper for current sensing
The operating specifications of the evaluation board are as follows:
• The recommended input voltage operating range is 0 V < V
voltage is limited by the output voltage of the Boost converter, which is further subject to
operating mode, the duty cycle and the load value.)
• Frequency of operation of 200 kHz - 900 kHz.
• The maximum load current depends on die temperature and is further subject to switching
frequency and operating voltage. Forced air cooling or heat sinking can increase current rating.
GSWPT-EVBEZ Rev. 210307
EZDrive
© 2021 GaN Systems Inc.
Please refer to the Evaluation Board/Kit Important Notice on page 17
®
Open Loop Boost Evaluation Board
< 200Vdc) and low voltage (5Vdc < V
IN
, V
measurement and other performance
GS
DS
< 200 V. (The maximum input
IN
www.gansystems.com
GS65011-EVBEZ
Technical Manual
< 12Vdc)
CC
9